SHE SC17 - Appendix 3

SC17 - Appendix 3
01 Aug 2019

Yes
-

Table of User checks

Plug	Free from cracks or damage Free from any sign of overheating Flexible cable secure in its anchorage If the plug is not re-wirable or moulded, the cable grip should be checked by pulling and twisting. No movement should ensue Pins not bent or damaged Live pins should be sleeved No paper label on the bottom Plug does not rattle The plug is not loose in the socket and can be easily removed
Flex or cable	Is it in good condition Does not show fraying, cuts and damage Not in an area where it could be damaged Not too long or short No joints or connections Only one flex connected to the plug Not bent too tightly Not a trip hazard Not run under a carpet or floor covering Unwind an extension lead fully to inspect its full length
Socket outlet or flex outlet	Free from cracks or other damage No signs of overheating Pin shutter mechanism functions Socket is not loose If a switch is fitted, it operates correctly
Adapter or extension lead fitted with RCD	Inspect device and make sure the operating current is not above 30mA Check the device by plugging in and pushing the test button, the RCD should operate and turn off
Appiances or items of equipment (includes ELV)	Free from cracks, chemical or corrosion damage to case or access to live parts Equipment is operated with protective covers in place and doors closed Equipment can be used safely Equipment switches on and off correctly Equipment works properly There is sufficient space to allow cooling, not to close to walls to inhibit good ventilation Not likely to overheat due to obstructions and items hanging over equipment Correct lamp rating for luminaires No liquid items are placed on top of the equipment
Environment	Equipment suitable for its environment. Extension leads and multi way adapters are not being used incorrectly. Where possible, equipment is not left on overnight. Should this be necessary then suitable control measures must be identified and implemented.
Suitability	The equipment is suited to the work it is required to carry out (fit for purpose)

Contact: Baker, Gareth (STFC,DL,COO)